NFC Time Switch

The NFC time switch can be programmed, consulted and modified via a smartphone. By placing the mobile device close to the Perry switch, the information is transferred via the NFC chip. The App allows you to program new devices, read the programming of devices already installed and make any changes. The copy/paste function is very practical in cases where multiple devices need to be set with the same program. The display and the front buttons make the product programmable in the traditional way.

Technical Features

• Power supply: 230Vc.a.+/-10%, 50Hz
• Contacts output: 16(2) A / 250V c.a.
• Max programs number (ON+OFF): 58
• ON - OFF minimum connection time: 1 second
• Power: Incandescent LPs 2300 W
• Power: Fluorescent tube LPs not compensated 700 W
• Power: Fluorescent tube LPs parallelly compensated 290 W (tot. capacity 35 microF)
• Power: LP CFL/LED 105 W (max. 7 lamp. x 15 W)
• Max cross-section of wires terminals: 1 ... 6 mmq
• Protection degree (IP): IP 20 - IP 40 (on rear of switchboard)
• Type of output: terminals with captive screw
• Insulation Class II
• ON / OFF relay signal: On/OFF on LCD display
• Charge reserve: 4/5 years
• Type of reserve: Lithium battery
• Time tolerance: ± 1 sec/day
• Operating temperature limits: -20°C/+55°C
• Storing temperature: -30°C/+60°C
• Type of installation: DIN rail /on rear of switchboard
• Thermoplastic housing – grey RAL 7035
• Type of use: civil / tertiary / industrial
• Controls: ON / OFF programming keys, ON / OFF manual override key
• Clock setting accuracy: digital for hours / minutes
• Daylight saving time change: Euro / None
• Digital programming: for hours / minutes / seconds only by App
• Dimensions (LxWxH): 35 x 60 x 90 mm

Additional Features

• Up to 58 programs
• Programmable from iOS and Android smartphones and tablets
• Standard Program ON/OFF
• Holidays program
• Button for manual control
• Communication LED
• LED status relay
• Charge reserve: 4/5 years
• Replaceable battery on the front of the product